News description

Product name: Tool Setter Blow Rod

Material: SUS304

Processing technology: CNC lathe processing

Dimensions: ￠10*50mm

Processing accuracy: 0.01mm

Recently, a customer consulted Shanghai ANTISHICNC Company about a CNC lathe processing tool setter blow rod. The following is the technical solution matched by the engineer and the processing steps shared:

① Rough processing of CNC lathe machine: clamp the blank, use the external cylindrical turning tool to rough turn the outer circle, and leave 0.5-1mm finishing allowance; according to the needs, use the drill to drill the center hole or through hole to prepare for subsequent processing.

② Semi-finishing of CNC lathe machine: semi-finishing of the parts that need further processing, such as turning steps, tapers, etc., to control the dimensional accuracy within a certain range, and leave 0.1-0.3mm allowance for finishing.

③ CNC lathe finishing: Finish the outer circle to the required size of the drawing to ensure dimensional accuracy and surface roughness; because the customer’s tool setting instrument has an inner hole, it is necessary to use an inner hole turning tool or reamer for finishing; for the threaded parts, use a thread turning tool to process the threads and control the pitch and tooth profile accuracy.

For the processing of the tool setting instrument blowing rod, Shanghai ANTISHICNC Company recommends the H36 CNC flat lathe, the model reference is as follows:

Specifications	Unit	H36
Maximum turning diameter on the bed	mm	φ360
Maximum machining workpiece length	mm	220 (chuck)
Maximum swivel diameter on the carriage	mm	φ110
Spindle diameter	mm	φ48
Spindle speed	rpm	2000
Draw tube through hole	mm	φ40
main motor power	Kw	3.7KW servo main motor

Keywords: lathe machine, CNC lathe machine, flat CNC lathe machine, Blow rod turning machine